|
RDO 302 ES is a unique product developed for all types of drilling where rock drill oils are used, such as D.T.H., air tracks percussive drills, casing drivers and top hammers.
RDO 302 ES reduces the potential of environmental damage during mining production, mineral exploration, construction and quarrying. It has proprietary lubricating compounds that are not washed off by moisture, thus offering protection when drilling with water. Rust does not develop on internal parts when the hammer is not used.
RDO 302 ES has a special filming additive that prevents piston scuffing and heat build up. Purchase of internal hammer parts is reduced dramatically. It has a viscosity that allows the lubricant to flow freely to areas requiring lubrication. RDO 302 ES is particularly suitable for drilling uncontaminated water wells and monitor wells.
A unique cost-saving fluid formulated to speed-up hole-collaring, reduce collar sloughing and stabilize the total blasthole.
- can be used with air-rotary tri-cone, downhole hammers and all types of top hammer drills (surface and underground);
- reduces re-drills;
- eleminates regrinding of cuttings, thus creating bigger chips for sampling purposes;
- leaves a sticky, neatly stacked cuttings pile that is not prone to sloughing prior to loading the hole;
- acts as a dust suppressant and reduces wind blown fines;
- allows blastholes to be fully loaded, helping to optimize blasting operations.
Control Chemical can modify the formula to fit any mine's drilling conditions and provide start up and technical support.
An environmentally safe fluid for extending the freezing time of drilling water no gylcol/alcohol.
- when mixed with drilling water on blasthole rigs, exploration drills, construction equipment, etc., slows the freezing process;
- is not a permanent antifreeze. It is an environmentally safe alternative to help avoid environmental contamination by pumping methanol or similar alcohols onto, or into, the ground;
- is noncorrosive and offers protection to the tank and pumping system due to its lubricating capabilities, unlike alcohol based systems;
- is similar to the alcohol based antifreeze and should be used for short periods of time for inactive equipment where water is not drained from the systems;
- is highly water soluble but will experience partial separation, over extended periods, as do the alcohol based antifreeze;
- must be mixed into the water for best results.
|
|