Kennametal Tricon Steels

Tricon fabricates a variety of products for a wide range of industries, including pulp and paper mills, mining and processing operations, steel mills, chemical and refining operations, and many more.

Tri-Braze

Impact and Abrasion Resistant Alloy Steel

Designed to tackle your toughest abrasion and impact applications, Tri-Braze combines an engineered balance of alloying elements with controlled heat treating and extremely low sulfur for and ideal hardness/touhness ratio.

High hardness for better wear resistance.
Balanced alloy steel chemistry for optimum hardness/toughness ratio.
Extremely low sulfur content and fine-grain structure.
Excellent depth of hardness and high impact resistance.
Excellent internal cleanliness (ultrasonically tested when specified on order).
Long performance life and less downtime to lower overall maintenance costs.
Tri-Braze® plates are available in thicknesses up to 10″, widths up to 120″, and lengths up to 288″.
The Tri-Braze chemistry provides excellent weldability.

Tri-Blaze Dura-Plus

The Next Generation Abrasion Resistant Alloy

Tri-Braze Dura-Plus is the next step in evelution of abrasion and impact resistant alloy steels. This patent pending technology provides a combonation of hardness, toughness, formability, and wearability that is unavailable in any ther wear plate.

Average hardness exceeds 470 BHN.
Longest performance life in the industry reduces downtime to lower overall maintenance costs.
Tri-Braze Dura-Plus cheestry provides excellent weldability in feild condition.
Balanced alloy steel chemistry for optimum hardness/toughness ratio.
Extremely low sulfur content, fine grain structure and excellent internal cleanliness provides the highest impact resistance in the industry.
Tri-Braze Dura-Plus chemistry and processing ensures full hardness throughout the plate, and avoids the “soft middle” of lesser quality plates.
Available in thicknesses up to 3/4 inch, widths up to 120 inches, and lengths up to 240 inches.

SUPER-C

Chromium Carbide Abrasion Resistant Plate

Super-C is a chromium carbide overlay, wear-resistant plate with a mild steel base for weldability. Tricon’s unique cladding process produces a harder, tougher, and more wear-resistant surface making Super-C superior to any other chromium carbide plate available on the market.

Mild steel base plate can be easily welded, bolted, or studded to existing structures.
Can be applied to nickel-based, stainless, and other steel substrates.
Ideal for severe abrasion and moderate impact applications.
Maximum carbide concentration and alignment through proprietary process makes Super-C the most wear-resistant overlay plate on the market.
Consistent hardness and controlled chemistry.
Excellent impact, abrasion, corrosion, and heat resistance.
Proprietary herringbone pattern breaks up flow channels and premature plate wear, regardless of installation direction.

Duracorr

Low Carbon Stainless Steel

Duracorr 50 - A low carbon, 12% chromium dual-phase stainless steel. When compared to weathering, painted or galvanized steels, it has a life-cycle cost advantage that permits its effective use in a wide variety of applications. Duracorr 300 – Duracorr 300 is produced to a nominal hardness of 300 BHN for applications where both abrasion and corrosion-resistance are required.

Much higher yeild strength than Type 304 stainless.
Substantially more corrosion-resistant than weathering, painted or galvanized steels.
High toughness.
Excellent formability.
Good elevated temperature yield strength.
Weldable using conventional welding processes (SMAW, GMAW, FCAW).
Coefficient of sliding friction comparable to 304 stainless in “polished” surface condition.
Complete inventories maintained for prompt service.

Tiloy

Alloy Shafting

Triloy is a quenched and tempered, machine straightened, stress relieved and demagnetized alloy bar widely becoming one of the most utilized alloy steel shafting materials in the industry.

High strength and hardness levels allow you to minimize shafting diameter for your application.
Special treatment allows 20-40% faster cutting speeds and increases carbide life when compared to conventional 4340 bar.
Post production stress relief minimizes distortion during machining.
Improved fatigue properties provides longer service life.
Demagnetized to eliminate chip/dust pick-up in service, increasing bearing and shaft life.
Complete inventories maintained for prompt service.