Industrial Products

INDUSTRIAL PRODUCTS

Creighton Rock Drill Ltd. has environmentally safe oils that are becoming more important in the industry as we all work together for a cleaner, safer planet. ES oils are made from vegetable sources so they are 100% environmentally safe. These oils have been on the market for quite some time now and have proven to be as good or better than petroleum-based oils. Also in our industrial products, you will find Tanner de-icing systems that will keep your equipment moving throughout the winter.

Creighton Rock Drill Ltd. has environmentally safe oils that are more important in the industry for a cleaner safer planet. ES oils are made from vegetable sources and are 100% environmentally safe and have proven to be as good or better than petroleum-based oils. Also in our industrial products, you will find Tanner de-icing systems that will keep your equipment moving throughout the winter.

Creighton Rock Drill Ltd. stocks the Ajax A9 Super High Tensile Fastening System and the A9 Plow Bolts both in the 180,000 psi range. Our certified Pejo Lifting Hooks transform your excavator and loader bucket into a lifting device and we have a full line of graded chain, slip & grab hooks, load binders and many lifting solutions from Dominion Chain.

DEMOLITION AGENTS

Crack Rock Or Concrete Using 3 Easy Steps:
  1. Drill.
  2. Mix.
  3. Pour.

BINDING AGENTS

Super Mud
Super Mud and Super Mud Dry are highly concentrated synthetic polymers that are primarily used to create high-viscosity slurries that stabilize excavations, maintain hole cleanliness, and promote stronger load capacities.
Super Mud slurries also simplify the process of slurry mixing, excavating, concrete placement, and disposal.
These slurries are environmentally friendly and recyclable…Read More

LUBRICANTS

Fluid Injector
The Matex Fluid Injector is AIR operated and TIME activated. It is completely self-contained and easy to install. The Matex Fluid Injector is for injecting a wide range of different products such as Tri-Lube, RDO-302 ES, Hole Control, Vibra-Stop, Liquid polymers, Foam, etc. If injecting foam, use Matex soluble lubricant to avoid rust that could result from the foam.

Designed to deliver a measured amount of product each injection to ensure a proper mixture. The pump has been designed with only one moving part to ensure low maintenance.

The timer assembly is available in a range of different voltages and is designed to measure the exact amount of injection necessary to deliver the amount of product desired. The timer has a setting dial on the face of the timer for the ease of increasing or decreasing the amount of product necessary, or the timer can be pre-set for lubricating at a set rate…Read More

RDO 302 ES / ROO 302 ES MW
A unique product developed for all types of drilling where rock drill oils are found. Such as D.T.H., air tracks percussive drills, casing drivers, and top hammers. Saves wear and improves performance…Read More

Hole Control
A unique cost-saving fluid formulated for use in air-rotary tri-cone, down-the-hole hammers, and all types of top hammer drills (surface and underground)…Read More

Slo-Freeze ES
Designed to reduce freezing issues for the transmission of water in drilling fluids as well as water injection system for air drilling…Read More

ES Thread Compound
Thread Compound ES’s unique formulation provides excellent protection against thread wear, galling, and seizing for tool joints, drill collars, and rotary-shouldered connections…Read More

Dust-Less
A mixture of vegetable oils and synthetic chemistry makes drill water both oily and viscous. This combination causes dust particles to adhere to each other and stick to the walls of the borehole…Read More

Torqueless
Based on an environmentally safe technology that has proven to be effective in lubricating down-hole consumables for more than 15 years…Read More

Foamer ES
Foamer ES  is a non-alcohol-based foam for diamond and rotary drilling…Read More

Tri Lube
Tri-Lube is an environmentally safe, high lubricity, water-soluble lubricant, designed to extend the life of air-bearing roller stabilizers, drill steel, and rotary three-cone drill bits…Read More

Hydraulic Oil
Greenplus Hydraulic Fluid from Greenland is a high-performance and environmentally safe lubricate. With properties that result in much less wear on your equipment’s hydraulic components. Greenplus Hydraulic Fluid is rapidly biodegradable, operator-safe, and made from renewable resources…Read More

Chain Saw Bar Oil ES
Excellent lubricating properties often reduce the consumption of oil by 50% when compared to petroleum-based oil. Greenplus Chain Saw-Bar Oil ES significantly reduces operator health hazards associated with the use of mineral oil, such as skin, eye, and lung irritations…Read More

More Industrial Products

TOOL JOINT LUBRICANT & GREASE

Honey Kote
New Gold Standard In Drilling Compounds.
The superior choice when maximum protection against seizing, galling, and load-bearing stress is critical…Read More

Stinger
Thread Compounds from BESTOLIFE™ provide Horizontal Directional Drilling contractors with the performance they can rely on in the harshest conditions…Read More

Bestolife 3000
The first totally non-metallic drilling compound formulated to address environmental concerns as well as the costs of thread compounds with high percentages of heavy metals…Read More

Bestolife 3010 Ultra
A non-metallic thread compound for rotary-shouldered connections and is effective for jack-up systems. Heavy metal-free for environmental concerns…Read More

Copr Plus
Copr Plus formula is an environmentally friendly non-lead non-zinc thread compound for rotary shouldered connections…Read More

Copr Plus Pumpable
Copr Plus Pumpable is an environmentally friendly non-lead non-zinc thread compound for rotary shouldered connections. Developed for applications where automatic units are involved…Read More

G10 Thread Compound
G10 is a moly-based thread compound designed specifically for Top Hammer drilling. An industry staple for over 30 years. G10 is a high-temperature lubricant that will stick and stay under high temperatures…Read More

JAX Snowplow Grease
JAX Snowplow Grease is a heavy-duty water-resistant lubricant that is proven to be the most technically advanced grease for sliding steel-on-steel snowplow applications available on the market today! …Read More

More Industrial Products

DE-ICING PRODUCTS

Tanner De-Icing System
Tanner de-icing system is a very safe and easy way to keep your equipment moving in the winter months. Tanner, Frosto, and No-Tox gases are dispensed using a Tanner dispenser into the airflow in your equipment…Read More

SAFETY HOOKS

Type C – For Excavators
The PEJO Safety Lifting Hook, type C, is the top recommendation for bigger excavators. Also suitable for heavy lifts within the industry…Read More

Type U – For Wheel Loaders & Front Loaders
The PEJO Safety Hook, type U, is suitable for smaller excavators, wheel loaders, and front loaders. The hook holds a 5-fold safety in both pulling directions…Read More

RUD Lifting Points
ABA Weldable Lifting Points, full working load in all directions for hoisting, moving, pulling, driving, and conveying…Read More

BOLTS & FASTENERS

A9 Scraper Blade Bolts
The Ajax A9 Scraper Blade Bolt is made to excel and blow away the competition. The Ajax A9 Scraper Blade Bolt is a premium system manufactured to the 170,000 psi range leaving the competition well behind at a mere 155,000 psi spec…Read More

A9 Super High Tensile Bolts
The engineering of the Ajax A9 High Tensile Fastening System, with a mechanical strength the highest in its class, is ideally suited for high-stress applications…Read More